Dear Sir, Reference – from your kind telephonic discussion and letter, thanking you very much for the Interest shown in our products, for the supply of Stretch Blow Moulding Machines for making Bottles in various sizes, we herewith quote for our Machine: PERFORMA INVOICE RATES FOR MACHINE MODEL NO. CP-2 1.Stretch Blow Moulding Machine (100 to 2000ml. Model CP–2 (Semi Automatic. Production – 500 Bottles Per Hour. 2. Tray type Preform Heater for Bottles. Imported parts used in our machines are from reputed international Companies viz. Heating Elements Electricals Contactors Cylinders
Limit Switch
U. K. P. U. Pipes GERMANY Collaborated with Cutler Hammer U.S.A. Telemecanique/Square D –FRANCE Telemecanique/Square D –GERMANY Collaborated with Sampras of Holland & Eugen Seitz Ag Wetzikon-Switzerland Cost of Model CP-2 Rs.4, 40,000/- 3. Ancillaries Used in our Machines Air Compressor (10HP Refrigerated Air Dryer (ISO 9001 Germany/Italy Pre Filter (ISO 9001 Germany\Italy Micro Filter (ISO 9001 Germany/Italy Cost of Ancillaries Rs.4, 90,000/- Tools Rs.1,475/- Stand for Refrigerated Air Dryer and Filters Rs.9,000/- Total Rs.9, 40,475/- Loading, unloading, carring and forwarding at your truck Rs 4500/- Erection, Commissioning, Trail Production & Training to Staff @5% Rs.47, 024/- Moisture proof Export worthy Packing @5% Rs.47,024/- Grand Total Rs.10, 39,023/- Note: - 1. The above rates are Ex-Factory, New Delhi. 2.Loading, Un-loading, Transportation and Insurance charges would be at buyer’s account.3.Local Taxes remove will be added if Form ‘H’ is provided not at the time of delivery.
- 2 -
Specification for PET Stretch Blow Moulding Machine Model No. CP-2: 1.PET Stretch Blow Moulding Machine Model CP-2 (100ml – 2000ml General: Bottle Volume : 100ml – 2000ml Production per hour: 400 Bottles per hour of 34g-38 g (2000ml PET Bottle and production also depends on the performance of the Machine Operator. Cavity: 2 Man Power Required: 1 Air Pressure and Electrical: Max Blowing Pressure: 18Kg/cm2M/c working Pressure: 30Kg/cm2 Max. Air Consumption: 35cfm Locking Pressure: 8 Ton Power Consumption of M/c. & Heater (KW: 3.6KW Single Phase Mechanical: Max. Opening Stroke: 200mm 2. Preform Heater: Tray type Heater and Conditioner 121 bore for small Bottles up to 2ltr. Detailed Specification of Ancillaries best Suitable for our Machines (as desired by you 3.Air Compressor Properties:Reciprocating Type Two Stage Three Cylinder with receiver a.For Machine Model No. CP-2 Compressor Rating 12.5 HP/ 3Phase Motor/ 0-17kg/cm2 Pressure / 35cfm. 4.Refrigerated Air Dryer (ISO 9001 Properties:Air Flow at 35oC - 1100 1/min. – 66 m3/h Nominal Ambient Temperature - +25oC Max. Ambient Temperature - +45oC Min. Ambient Temperature - +1oC Nominal Inlet Air Temperature - +35oC Max. Inlet Air Temperature - +45oC Nominal Inlet Air Pressure - 7 Bar Max. Inlet Pressure - 16 Bar Outlet Air Pressure drop – p - 0.2 Bar Inlet-Outlet Air Connection - ¾ ”Cooling Fluid Type - HFA 134.a Cooling Fluid Charging - 350g Cooling Fluid Evaporation Pressure - 1.8 Bar Cooling Fluid Condensation Pressure - 8.0 Bar Nominal Electric Power - 330 W Max. Electric Power - 430 W Fan Electric Power - 40 W Weight - 35 Kg Max. Noise level - < 70 dbA